Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks
(1253 reviews)
Price: $321.00
Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks
Item # VGD-10-100
Retail:$377.41
Our Price: $321.00
You Save: $56.41
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1253)
- Q & A (0)
- Videos (16)
- Photos
Stromberg Carlson Tailgate - VGD-10-100
- Fifth Wheel Tailgate
- Truck Tailgate
- Open-Design Tailgate
- Stromberg Carlson
- Steel
- Without Lock
This tailgate from Stromberg Carlson features an open design that improves your field of vision when driving and is custom fit to your vehicle. Cutout allows for easy towing of 5th-wheel and gooseneck trailers, and aerodynamic design reduces drag.
Features:
- Vented design
- Improves your field of vision when driving
- Reduces drag for better gas mileage
- Convenient cutout for towing a 5th-wheel or gooseneck trailer
- Heavy-duty steel tube construction
- Powder coat finish can be painted to match your vehicle
- Finishing coat of paint is recommended for complete rust resistance
- Spring-loaded latches secure the tailgate to the truck
- Gate lowers to sit flush with truck bed so that you can easily load cargo
- Uses original cables that came with your vehicle
- Installation hardware is included
- Vehicle-specific application
- Made in the USA
Specs:
- Weight capacity: 100 lbs
- 1-Year limited warranty
VGD-10-100 Stromberg Carlson Tailgate - 100 Series
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2018 Ram 1500
- 2019 - 2024 Ram 1500 Classic
- 2010 - 2018 Ram 2500
- 2010 - 2018 Ram 3500
- 2010 - 2014 Dodge Ram Pickup
California residents: click here
Video of Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson 100 Series 5th Wheel Tailgate Review
Hey guys. Today we're going to take a look at the Stromberg Carlson 100 Series 5th Wheel Tailgate. Now this is going to be a direct replacement for your factory tailgate for most of your late eighties to early nineties Ford model trucks. Now this is a vented tailgate so it's going to give you better vision for when you're driving or backing up, and it's also going to improve your gas mileage. While this cutout is also going to be good for loading any 5th wheel or gooseneck trailers so you won't have to lower the tailgate to get those loaded.Now if you got to tailgate that's broken or damaged or you just don't want to mess with it anymore, a lot of times with these older trucks they'll just be very outdated and just very weathered down. So you can see this one is, it's very hard to pull that handle up to get it open, so it'd be good idea to replace it.
But if you don't want to spend the time or the money to try to find an exact replacement for the tailgate, the Stromberg Carlson is going to do a great job to replace it.It has a heavy duty steel tube construction, which is going to be very durable and have a 100 pound weight capacity and has a black powder coat finish which can be painted to match the surface of your vehicle. And that's what actually Stromberg Carlson recommends to complete the rust resistance. This is going to be custom fit tailgate, so it's going to match the contours of your truck bed. It uses two of these latches to secure to your tailgate while also utilizing the factory pin that your old factory tailgate attached to first. So we just got to pull in on the pins, close it, and the pins are going to lock behind those pins so that you can't unlock it.Now that we've gone over some of those features, let's show you how to install.
And before we install our tailgate there's a bit of pre-assembly we have to do. It doesn't take too much time at all. We already have one side done. Next side we'll just do real quick. First things first.
We're going to take this pin out. We just push in on the sides like so. Pull the pin out. We're not going to need that. Going to take this ring, key ring, and slide that around into the slot.
That's going to be basically your handle. There we go. Just like that. And we're to take this rubber grommet and we're going to put it on the inside of the bracket, face down. We want it to wrap around. Now it is advised to use a type of adhesive so that it stays in place, but for demonstration purposes, we're going to skip that step.Now we can get it in place on our tailgate. You want to make sure that the latch right here is on the outside of this bracket right there. It's going to slide into place just like that. Now we'll take our included hardware. We're going to make sure that the heads of the bolts are on the outside. We'll thread one of our nuts on there. Do the same for the other one. Now you will notice that when it's not tightened down, you do have a lot of adjustability right here. You want to tighten it down so that the latch is level with this rail right here. So just get a flat head screwdriver and then a wrench and then you can tighten that down.Now we're going to remove the factory tailgate. What we need to do first is open it up. Bring it down and we need to get these cables unattached from the truck bed. And how are we going to do that is a tab right here, we're just gonna push in on it and push up just like that. And then do the same for the other side. Now we have both cables and removed and hat we're going to do is pull it off of the passenger side like so, and then the driver's side. And then we can set it aside.Now we can grab our Stromberg Carlson and put it in place. We're going to put that tube on the driver's side first, like so, and then we can get the passenger's side on. So lift up, push it to close it. You may have to pull on the pins just to get her to close for the first time, just so we can adjust. I see over here on our driver's side, our latch is pretty tight. We're not going to mess with that at all. But if you come over to our passenger side, we're going to see that we got a lot of wiggle room, so we're just going to make a few adjustments to our latch and then try it again. So we're going to open it up first, pull both ends and open up the tailgate. And what we're going to do is we're going to hold up with our knee and we're going to come down to the bolt and the nut that we have on the latch system, loosen those up and then push it down towards this base part right here. Let's go ahead and do that.Now we've made that adjustment. Let's go ahead and shut our tailgate. Remember you've got to pull on the pins to get to tailgate to shut. Now you see we did take out a lot of that rattling just by making that minor adjustment. Now at that point, your installation's going to be complete. However if you want to go a step further and attach your factory cables, you can do that as well. Just keep in mind that the hardware is not included, but you can just kind of go around to the shop and maybe find a couple of scrap parts. We just have a basic, a nut and bolt, and then we have a washer around it as well. You cannot use the same hardware that was holding it to the factory tailgate because it was just one screw holding it into the side without a bolt. And another thing you want to keep in mind is this is not a weight bearing tailgate, so I would avoid standing or sitting on it or setting anything dense and heavy on top of it while it's lowered.That's going to do it for our look at the Stromberg Carlson 100 Series 5th Wheel Tailgate.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks - VGD-10-100
Average Customer Rating: 4.6 out of 5 stars (1253 Customer Reviews)
This tailgate from Stromberg Carlson features an open design that improves your field of vision when driving and is custom fit to your vehicle. Cutout allows for easy towing of 5th-wheel and gooseneck trailers, and aerodynamic design reduces drag.by: Darrin 01/19/2024
After 1 year of use with our small 5th wheel RV, the Stromberg Carlson tailgate remains solid and looks great. Pleased with the purchase.
by: Jjbbrangus05/20/2020
This gate is a great replacement for the original gate which I have in storage. I do quite a bit of trailering and like the convenience and better visibility. I am searching for aa backup camera that would plug into wiring harness. Do not want to disassemble original gate to get the camera.
by: Richard 10/30/2023
great tail gate for your 5th wheel! super easy to install.
by: Patton08/22/2018
2016 Ram 2500
Geat Product shipped fast great packaging took 10 minutes to install fits great looks great . To install look at the video on etrailer tell you evetything even how to take your other tailgate off. Would defently order from etrailer again
Patton
8/22/2019
Fantastic
by: William D.09/01/2017
2014 Dodge Ram Pickup
This is the second Stromberg Carlson tailgate we have had, and we are very pleased with the fit, finish and simplicity of the design. ( Pic 1)
The design lined up with body lines of our 2014 Ram 3500 as good as could be expected. (pic 2)
One thing about this tailgate that I experienced with our first one, is that it rattles when you hit bumps and sings the song of its people on gravel or washboard roads...people will hear your tailgate coming probably long before they hear the rest of your truck. The latch does come with a rubber bumper, but that only helps quiet the rattle a little bit. The main source of the rattle is where the latch rides on the tailgate striker, it is a nice touch being able to use the OEM striker by the way. (pic 4)
I put a piece of hose over the OEM striker for the latch to ride on (pic 5). I am sure the hose will wear down over time but that is an easy fix. The tailgate now latches very firmly and only a little rattle from the lower hinge area, but nothing like it was.
Another nice touch was the cable attachment, we were able to use all the original Ram hardware, you will need to supply two M8 nuts and two washers, but it is otherwise plug and play. A major improvement from our previous Stromberg tailgate.
I highly recommend this tailgate, the last one was as good as the day we bought it after 12 years when we sold it (if it had fit the RAM we would still have it!). The fact that this tailgate is inexpensive is an added bonus. Installation time was about half an hour.
Our experience with etrailer was stellar and George took great care to communicate with us over the progress of our purchase...there is a reason why we are return customers!
by: Poppa Bear04/07/2024
Installed this on a 2013 ram 3500 and I’m thrilled the with the fitment and ease of installation. It’s interesting that it took longer to assemble the latch mechanism than to install the tailgate. Would definitely recommend to others!
by: David A12/28/2023
One word Fantastic
by: Samantha A.07/14/2017
2016 Ram 3500
Heavy duty, easy to install,great value, looks awesome! My original factory tailgate had a big dent on the top of it and it made my $65,000 truck look like a jalopy, after I replaced the tailgate with a Stromberg Carlson 100 5th Wheel Tailgate it not only improved the value of my truck but it now looks even better than before.
by: David09/03/2018
2014 Dodge Ram Pickup
It was delivered in a timely matter and easy to install. As far as the back up camera, I transferred it to the bumper next to the tag plate.
I also picked up around 2 mpg towing my 13000 lbs 5th wheel camper. And around 3 mpg without towing anything. I would recommend it.
by: Alan I.03/15/2019
Pontiac Trans Sport Van
Tailgate was perfect fit and finish. So easy to install, (15 minutes after delivery). Really great experience considering I was in a trailer park when I needed this. I left original tailgate at home in order to transport my motorcycle to southwest. Now I can load up other paraphonalia for return trip home.
by: Edward04/18/2018
2013 Ram 1500
When I arrive from work and saw a box by front door open box then do assembly then installed wow very easy and simple to do it look great on my truck
by: A.J. S07/02/2021
Really fast shipping, really excellent product, and the installation video was great and most helpful. Thank you for great service.
by: Glenn R07/10/2018
2016 Ram 2500
Beautiful tailgate. So easy to install. I'm happy I found you. Well built.
by: Allen E09/13/2013
2010 Dodge Ram Pickup
Installed on a 2010 dodge ram 2500 fits great easy install watched the video took 5 mins to install very happy with this product.
by: Kelly B09/19/2015
2015 Chevrolet Silverado 3500
First off let's get real, this is NOT a heavy duty, put 300 pounds on it tailgate. It is also not $400 plus dollars. It is well made, it fit my 2015 Dodge 3500 (non-dually) like the factory made it. The latches, with adjustments provided a good tight closure, read no rattle. The parts were well secured to the gate when I opened the box and all parts fit perfectly. The existing cables for supporting the gate fit perfectly. I spent more time removing the OEM tailgate than I did putting on the new one. It looks good, fits good and did not require a loan to purchase. Etrailer shipping was phenomenal, lighting fast. If there is a complaint it is the instructions, they totally suck, especially if you have no previous experience in this area. However, even if you have zero experience, do NOT shy away from this tailgate, take your time, take the old one off and "look" at the fittings, if you have enough of a brain to remove the old tailgate you can figure this out. Total installation time 30 minutes, if the OEM would not have been brand new and "painted on" installation would have been about 15 minutes. It is exactly what I wanted for the price I wanted it at. Good job Etrailer! Fact is, I have ordered other parts from you since this one!
Kelly B.
9/18/2016
After a year the gates looks like new, still working perfectly and still does rattle. Excellent product for the price.
by: George S.07/09/2017
2017 Ram 2500
Received 5th wheel tailgate on Friday was supposed to come on Monday, so received early. Service with Etrailer is great. The tailgate looks fantastic (not able to send picture). Was really east to install. Only problem was when I opened it one of the tubes that go across the gate had lost its weld on one end. (that is why only 4 stars.) Foam padding in box may have prevented this. I was able to spot weld it my self. Other than that I am very happy with it.
George S.
7/9/2018
Still very pleased with my 5th wheel tail gate. Works beautifully.
by: Cheryl 10/26/2022
Love my 5th wheel Carlson Tailgate. It’s so easy to unhitch , open & close. I love the way it looks too. Absolutely no problems .
by: John M06/23/2014
Dodge Ram Pickup
I really like this tailgate. I had one that I used for years on my ford truck and it gave me great service. Recently I purchased a new dodge RAM truck and the old tailgate would not fit so I ordered a new one. It fit perfectly. It is much easier to hitch and unhitch my 5th wheel.
John M.
6/23/2015
After a year I am still very satisfied with the tailgate. In fact we are on a trip right now.
by: Jimmy03/27/2018
Dodge Ram Pickup
Tailgate came on time, in good shape and hardware installed. A bit difficult to close until I discovered that it helps to pull both latch rings at the same time and push on. Paint a bit flaky.
2017 Ram 2500
Jimmy
3/27/2019
Tailgate is fine, I take it off and put it on as needed when I pull my 5th wheel. Im happy with the product.
by: Ron M.10/09/2016
Very good, I've been driving on rough roads and mountain trails and beaches, the tail gate still is tight (no rattles). It is perfect for easy coupling/uncoupling my 40 foot 5th wheel RV without getting out of the cab to raise/lower the tailgate.
Ron
Ron M.
10/9/2017
I have 15000 miles pulling my 40 foot 5th wheel RV, the Carlson RV tailgate stays closed all the time when coupling uncoupling the 5th wheel It doesnt rattle, just as tight as when I first put it on. Great product, keep up the good products, Ive purchased other products from etrailer, all have been great. Thank You,, Ron M.
by: Vicki 07/08/2020
Great price. I’ve had it a year now, use it frequently as I switch out tailgates depending on what trailer I’m pulling. This one is easy to remove and install, also light weight enough to handle easily.
I would definitely recommend it and purchase it again if need be.
Vicki
7/9/2021
Still like new. My tween can install it when we switch out for the gooseneck trailer. Easy and light enough to pop up in there solo.
by: Karl 03/21/2023
Excellent product. Fit well and works perfectly. Instructions were a bit vague but assembly was easy to figure out. Thanks for a good product at a reasonable price.
by: Peter04/11/2018
2016 Ram 1500
Tailgate fit well, easy to install. Took some weight off the Truck as I need all the payload I can get. Access to the Truck bed and the Hitch is better due to the design. Can hitch up now without opening the Tailgate.
Tailgate shows a little Rust but it is easy to fix.
Peter
4/11/2019
Still very good. Simple functional design.
by: Joe06/21/2023
First, save a Gas.
Second, easy to load something.
And lots things I'd like.
I am very happy with this product.
25
1248
Show More Reviews
See what our Experts say about this Stromberg Carlson Tailgate
- Will Stromberg Carlson Tailgate # VGD-10-100 Fit 2015 Ram 3500 SRWThe Stromberg Carlson Tailgate # VGD-10-100 will indeed fit your 2015 Ram 3500 with single rear wheels. An installation video is linked for you showing the process in a 2011 Ram pickup. The tailgate is secured in its closed position with included pins.
view full answer... - Does Stromberg/ Carlson Fifth Wheel Tailgate # VGD-10-100 Open Like OEM TailgateThe Stromberg/ Carlson Fifth Wheel Tailgate you referenced # VGD-10-100 does not have a handle, and therefore would not open and close like an OEM tailgate. To open the tailgate, the large cotter pins are removed which allows the tailgate to swing open. The tailgate uses the OEM cables from your original tailgate to hold it open.
view full answer... - What Gauge Steel is Stromberg Carlson 100 Series 5th Wheel Tailgate VGD-10-100I checked with the manufacturer for you and the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks # VGD-10-100 uses 16 gauge steel tubing. That means it has a thickness of about 1/16th of an inch. The tailgate will fit your 2012 Ram 3500 and I have added a link to the instructions as well as a video showing an install on a '12 Ram 3500 of the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks # VGD-10-100.
view full answer... - Compatible 5th Wheel Tailgates For A 2013 Dodge Ram Pickup Your 2013 Dodge Ram Pickup has two compatible 5th wheel tailgate options: The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate # VGD-10-4000 or the Stromberg Carlson 100 Series 5th Wheel Tailgate # VGD-10-100. Since both are compatible fits and similar design it really just comes down to aesthetics.
view full answer... - Should Stromberg Carlson Tailgate for 2016 Ram 2500 be Painted?Not only is it okay for you to add paint to the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design # VGD-10-100 it is recommended by the manufacturer. You can do this before installing it on your 2016 Ram 2500 and it will help the gate resist rust. I've added a link to a video review of this tailgate for you to take a look at.
view full answer... - Measurement from End to the Top Bar Bend on Stromberg Carlson 5th Wheel TailgateThe Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks # VGD-10-100 has a measurement from the end to the middle of top bend of 13-1/2 inches. It is about 13 inches from the very start of the bend but 13-1/2 to where it starts to noticeably bend as shown in the attached photo.
view full answer...
- Will Stromberg-Carlson Open Design Tailgate Fit a 2010 Dodge Ram 2500Yes, the Stromberg Carlson 100 Series Open Design Tailgate will fit your 2010 Dodge Ram 2500. I have attached a brief installation video on a 2011 Ram 1500.
view full answer... - Availability of Longer Pin Box to Gain Tailgate Clearance with 5th Wheel Trailer Hooked Up There may be some compatible replacement pin boxes for your trailer that are slightly longer than your current model but none would provide enough clearance to allow room for your tailgate to open. Any replacement model will be relatively similar in terms of overall size to the factory unit. If you are needing to lower the tailgate in order to hook up the trailer you might be interested in a 5th wheel tailgate like # VGD-10-100, which is designed for certain model Ram trucks. If you can...
view full answer... - Solution for Convert-A-Ball Cushioned 5th Wheel Adapter Causing Trailer to Hit Ram 2500 TailgateFrom what you are saying, it sounds like you are having clearance issues in your 2018 Ram 2500 when using the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G. Rams do tend to sit higher than other trucks and clearance can sometime become an issue. One potential solution is to get a tailgate designed for 5th wheel/gooseneck towing like the Stromberg Carlson 100 Series 5th Wheel Tailgate # VGD-10-100.
view full answer... - Does Stromberg Carlson Fifth Wheel Tailgate Fit 2019 Ram 1500If your 2019 Ram 1500 is a Classic model (the older body style) then yes, the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design # VGD-10-100 that you referenced is a confirmed fit. I attached an install video for this for you to check out on a similar 2018 1500 model. At this time (May 2019) we don't have a fit for the new body style 2019 models.
view full answer... - Stromberg Carlson 5th Wheel Tailgate for 2001 Dodge Ram 3500We do have a 5th wheel tailgate for your 2001 Dodge Ram 3500 but the Stromberg Carlson 100 Series 5th Wheel Tailgate # VGD-10-100 does not fit your truck. You can use the similar 100 Series 5th Wheel Tailgate # VGD-94-101 which is shown in the linked review video.
view full answer... - Fifth Wheel Tailgate Recommendation for 2018 RAM 3500 Diesel DuallyFor your 2018 Ram 3500 Diesel Dually the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Dodge Trucks # VGD-10-4000 is my recommendation. There is not a directly compatible backup camera option, but I know people have customized this tailgate to utilize that factory backup camera. This tailgate also can use the Louvered Tailgate Insert for Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate # VI-4000 as well as the Louver Insert Kit for Stromberg Carlson...
view full answer... - Tailgate Options for 2017 Ram 3500 to Increase Aerodynamics as well as Add Cutout for 5th WheelThe tailgate of a 2017 Ram 3500 does not need to be removed or replaced to tow a 5th wheel trailer. We do however have some tailgate options that allow more room for a 5th wheel or a gooseneck trailer. You may be interested in: Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Dodge Trucks # VGD-10-4000. Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Dodge Trucks # VGD-10-100.
view full answer... - 5th Wheel Tailgates for a 2010 Dodge Ram Big HornFor a 2012 Dodge Ram we have the Stromberg Carlson 100 series 5th wheel tail gate # VGD-10-100 listed as a fit. I have included a link to a video showing a typical installation for you. We have some additional 5th wheel tail gates that will fit your truck. I have included a link to them for you.
view full answer... - Fifth Wheel Tailgate that Fits 2011 Ram 2500We had the chance to install the Stromberg Carlson 5th wheel tailgate part # VGD-10-4000 on a similar 2011 Ram 2500 and we found that it fit well and both sides of the tailgate hinge fit like it should. Check out the install video for this tailgate that I attached that shows it installed on the truck. We also had the chance to install part # VGD-10-100 on the same 2011 Ram 2500 which I attached an install video for as well.
view full answer... - Fifth Wheel Tailgate for a 2010 Dodge Ram 2500/3500 DuallyI spoke with my contact at Stromberg Carlson and she stated that the only 5th wheel tailgates they have for the 2010 Dodge Ram 2500/3500 are the 4000 series, # VGD-10-4000, and the 100 series, # VGD-10-100, that you have referenced. I have included a link to the tailgate options for your truck.
view full answer... - Is an Offset Adapter Needed to Tow a 5th Wheel with a Gooseneck Hitch on a 2011 Ram 2500 Short BedYou will need to do some measuring to determine if you will need an adapter with offset or not, or if you will even be able to tow a 5th wheel trailer with your gooseneck hitch. Here is how to determine if an offset would be required. First, measure from the center of the hitch in the bed of the truck, and add any amount of extension from the front of the trailer to the center of the king pin on your fifth-wheel trailer. If the king pin is recessed under the front of the trailer subtract...
view full answer...
- Fit and Compatibility of 5th Wheel Tailgate on a 2010 Dodge Ram Pickup and 2012 Dodge Ram PickupAccording to my research, the following 2010 Dodge Ram Pickup 5th Wheel Tailgates will also fit a 2012 Dodge Ram Pickup. Stromberg Carlson # VGD-10-100 Stromberg Carlson w/lock # VGD-10-4000 If you could tell me the specific model of truck you have and the particular 5th wheel tailgate you were looking at I would be more than happy to confirm the fitment for you.
view full answer... - Stromberg Carlson Steel 5th Wheel Tailgate for 2017 Ram 2500We sure do! The Stromberg Carlson # VGD-10-100 5th wheel steel tailgate fits 2010-2018 Ram 2500 trucks. Per the manufacturer, the tailgate has a 100 lb capacity. You can see an install video by clicking the provided link.
view full answer... - Stromberg Carlson 100 Series 5th Wheel Tailgate to Fit 2006 Dodge Ram 2500We have a 5th wheel tailgate that will work great on your 2006 Dodge Ram 2500, but the tailgate you referenced is not the one designed to fit your truck. For the same style Stromberg Carlson 100 Series 5th Wheel Tailgate for your 2006 Dodge Ram, you will want to use part # VGD-02-100. This tailgate with the open design will help make towing 5th wheels and goosenecks easier, while also reducing drag to help improve fuel mileage. I've attached an installation video of the # VGD-02-100...
view full answer... - Fifth Wheel Tailgate Recommendation for a 2001 Dodge Ram 3500I have a similar tailgate to the # VGD-10-100 that you referenced that will fit your 2001 Dodge Ram 3500 but this one isn't recommended for your vehicle. You will want the part # VGD-94-101 instead.
view full answer... - Fifth Wheel Tailgate and Hitch Recommendation for 2015 Ram 2500 Crew CabIt is always recommended to use a like style hitch for your trailer; fifth wheel hitch for fifth wheel trailer and gooseneck hitch for gooseneck trailer. Using a standard adapter like the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter, # CAB-C5G, can cause added stress for the trailer frame and hitch which could potentially void the frame warranty on your trailer. In addition, even if you were to use an adapter, you would not have sufficient clearance to complete the hitching/unhitching...
view full answer... - What Keeps the Stromberg Carlson 100 Series 5th Wheel Tailgate Open and Off of the BumperThe Stromberg Carlson 100 Series Fifth Wheel Tailgate, # VGD-10-100, will use the cables from your original tailgate to hold the tailgate open and off of the bumper. These tailgates are vehicle specific, so if you want to send me the year, make and model of your truck, then I can recommend the correct tailgate for you.
view full answer... - Steel 5th Wheel Tailgate for 2017 Ram 2500Stromberg Carlson offers a steel Tailgate as part # VGD-10-100 or a composite plastic louvered model, part # VGD-10-4000. Unfortunately, they don't offer a steel louvered model. You can see what both tailgates look like when installed by clicking the provided links.
view full answer...
Do you have a question about this Tailgate?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Hayden R
Video by:
Jonathan Y
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Mike S
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jjbbrangus
5/20/2021
The gate is as I expected and have I have recommended to friends who like the look and convenience when pulling gooseneck trailers.